7 Steps for the Asphalt Installation Process

Installing a new asphalt surface is a considerable project. It’s not something you should decide on overnight, rather something you should put a lot of thought and consideration into before you begin. Before you start the installation process, you need to find a professional asphalt company to handle the job.


Before your project begins, here’s what you can expect in the installation process. Let’s take a look at the seven steps for asphalt installation.


7 Steps for Asphalt Installation


Here are the seven vital steps that are necessary to complete the asphalt installation process:


1.   Demolish the Old Pavement and Clear Out Old Waste


The first step in the asphalt installation process is to demolish any existing pavement. Whether your current pavement is made up of asphalt, concrete, or pavers, removing the existing surface is vital to make space for your new project. The easiest way to demolish the current pavement is to use heavy construction equipment operated by a professional paving company. After you destroy the existing pavement, you need to clear off all debris and clean the surface to prepare it for the new installation.


2.   Grade the Driveway Slope to Ensure Adequate Drainage


The next step involved the grading or sloping of your paving surface. This allows you to prepare your surface for proper drainage. Today’s latest technology and industry tools allow the professionals to employ modern methods to ensure adequate drainage. This will help you prevent water damage to your surface in the future.


3.   Preparing the Sub Base


After grading the surface, it is time to prepare the surface for the sub-base. The sub-base is the most crucial part of the asphalt surface. It helps support the new pavement, providing a stable surface. It also protects the pavement from extreme weather conditions, temperatures, or water exposure. The sub-base should be compacted firmly to ensure maximum thickness and stability.


4.   Proof Roll and Repairing


After successfully adding the sub-base, it is time for proof roll to ensure that the material is strong enough. Proof rolling will expose any soft areas underneath. If you find any, repairing is made in the sub-base. If the sub-base shows a flex an inch or more under the weight of the roller, then it likely won’t correctly support the pavement.


5.   Binder Layer


The fifth step in this process is laying down a binder layer. It is laid to ensure that the new asphalt adheres permanently to the underlying bases. It is the strongest layer of your project.


6.   Installing the New Asphalt Surface


Finally, it is time to install the new asphalt surface. Once all supportive structures are prepared, you can install the final layer. This involves adding a fine layer of aggregate.


7.   Create Transition


Connect the old surfaces with the new ones to create a smooth transition. Butt joints are where old asphalt meets new asphalt. This is the final step in the asphalt installation process. Now, the new pavement is ready.


Contact Pro Asphalt Company for Your Next Project


If you need an expert Moreno Valley asphalt company, Pro Asphalt Company is here to help. Contact us today to schedule an appointment to discuss your project.


Leave a Reply

Your email address will not be published.